|For more information and enquiries, pls contact us at firstname.lastname@example.org|
33 Ubi Ave 3,
Tel: 65 - 6223 8933
10:30am - 8:00pm (Mon-Fri)
10:30am - 6:00pm (Sat)
Public Holidays & Sunday closed
We are Singapore based company. All prices listed are in Singapore Dollar (SGD).
Prices are subject to change without prior notice.
Jet Hobby RC Model Pte Ltd
Promote Your Page Too
| Catalogue Battery Charger iMaxrc B6 Twins Balance charger 1-6cell|
|iMaxrc B6 Twins Balance charger 1-6cell|
B6 Twins + Switching Mode Power Supply 15A S$199.00.
B6 twins features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may laed to an explosion due to the user’s fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the program of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the setting can be configured by user.
Internal Independent Lithium battery balancer
B6 twins employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During discharging, B6 Twins can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if any abnormal of any single cell.
Adaptable to various types of Lithium batteries
B6 Twins is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Quick and storage mode of Lithium batteries
Purposes to charge Lithium battery varies, “quick” charge reduce the duration of charging, whereas “store” state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Offer Price: S$98.00
- Maximum safety
- Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery’s voltage exceeds the threshold, the process will be terminated automatically.
- Automatic charging current limit
- You can set up the upper limit of the charging current when charging your Nicd or NiMH battery, It is useful for the NiMH battery of low impedance and capacity in the “Auto” charging mode.
- Capacity limit
- The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the Max value.
- Temperature threshold
- The battery’s internal chemical reaction will cause the temperature of the battery to rose. If the temperature limit is reached, the process will be terminated.
- *This function is available by connecting optional temperature probe, which is not included in our package.
- Processing time limit
- You can also limit the maximum process time to avoid any possible defect.
- Input power monitoring
- To protect the car battery used as DC input power from being damaged. Its voltage being monitored. If it drops belower limit, process will be ended automatically.
- Operating voltage rang:DC:11-18V /AC:100-240V
- Circuit power:Max.50watts x 2 (charging)/Max.5 wattsx2 (discharging)
- Charge current range:0.1-5.0Ax2
- Discharge current range:0.1-1.0Ax2
- Current drain for balancing Lipo: 300mAh/cell
- NiCd/NiMH battery cell count:1 to 15 cellx2
- Weight: 430g
| Misc Information:|
- Product Code: B6 Twins
- Offer Price: S$98.00
- Retail Price: S$129.00
- Category: Battery Charger
Back to: Battery Charger